Tia Portal V13 Sp1 Update 4th TIA Portal - TIA Portal. Hardware in the TIA Portal. Levy Library. The TIA Portal lets you integrate all the key components in your automation project. Siemens Trial Software for Automation and Motion Control. TIA Portal Step7 Basic and Professional V13 SP2 Trial Download. TIA Portal WinCC V14 + SP1.

OVERVIEW This updated advisory is a follow-up to the updated advisory titled ICSA-14-329-02C Siemens SIMATIC WinCC, PCS7, and TIA Portal Vulnerabilities that was published December 18, 2014, on the NCCIC/ICS-CERT web site. Exploring Biology In The Laboratory Pendarvis Pdf Writer. Siemens has identified two vulnerabilities within products using the Siemens WinCC application.

Siemens has produced a patch that mitigates this vulnerability in the WinCC application and is working on updates for the remaining affected products to address the other vulnerability in the WinCC application. These vulnerabilities could be exploited remotely. Exploits that target these vulnerabilities are potentially available. AFFECTED PRODUCTS The following Siemens products are affected: • SIMATIC WinCC • V7.0 SP3 and earlier: All versions, • V7.2: All versions prior to V7.2 Update 9, and • V7.3: All versions prior to V7.3 Update 2. • SIMATIC PCS 7 • V7.1 SP4 and earlier: All versions, • V8.0: All versions prior to V8.0 SP2 with WinCC V7.2 Update 9, and • V8.1: All versions with WinCC V7.3 prior to Update 2.

• TIA Portal V13 (including WinCC Professional Runtime): • All versions prior to V13 Update 6. IMPACT These vulnerabilities allow for unauthenticated remote code execution. Impact to individual organizations depends on many factors that are unique to each organization.

ICS-CERT recommends that organizations evaluate the impact of these vulnerabilities based on their operational environment, architecture, and product implementation. BACKGROUND Siemens is an international company headquartered in Munich, Germany. The affected product, SIMATIC WinCC, is a supervisory control and data acquisition (SCADA) system. PCS7 is a distributed control system (DCS) integrating SIMATIC WinCC. TIA Portal is engineering software for SIMATIC products. This software is deployed across several sectors including Chemical, Energy, Food and Agriculture, and Water and Wastewater Systems.

Siemens estimates that these products are used primarily in the United States and Europe with a small percentage in Asia. VULNERABILITY CHARACTERIZATION VULNERABILITY OVERVIEW.

TRANSFER/EXTRACT FILES A component within WinCC could allow unauthenticated users to extract arbitrary files from the WinCC server if specially crafted packets are sent to the server. CVE-2014-8552 has been assigned to this vulnerability. A CVSS v2 base score of 7.8 has been assigned; the CVSS vector string is (AV:N/AC:L/Au:N/C:C/I:N/A:N). VULNERABILITY DETAILS EXPLOITABILITY These vulnerabilities could be exploited remotely.

EXISTENCE OF EXPLOIT Exploits that target these vulnerabilities are potentially available. Indicators exist that this vulnerability may have been exploited during a recent campaign. DIFFICULTY An attacker with a low skill would be able to exploit these vulnerabilities.

Siemens has released for delivery its Service Pack 1 for WinCC V13, that will also be delivered within the scope of the relevant Software Update Service agreements. Significant expansions/features of Service Pack 1 include: • Support of the new SIMATIC Open Controller • Support of the second-generation Mobile Panels • Cooperation of WinCC with Step 7 across different projects • API Engineering of WinCC and Step 7 • Simple processing of projects with different engineering versions • Investment protection due to migration Support of the new SIMATIC Open Controller. The CPU 1515SP PC is a robust, PC-based system that uses the new S7-1500 Software Controller. The CPU implements the function of a classical S7-1500 controller in ET 200SP design on a PC with Windows. Additional HMI functionality is provided by the CPU 1515SP PC + HMI with pre-installed WinCC Runtime Advanced. This enables both control and visualization functions in one unit.

Support of the second-generation Mobile Panels. The completely innovated cable-connected second-generation SIMATIC HMI Mobile Panels in the display sizes 7” and 9” with enhanced scope of functions are now released for delivery. The second generation of the SIMATIC HMI Mobile Panels delivers convenient handling, exceptional performance, and high quality. The highlights: a luminous widescreen display, particularly easy configuration, and a unique illuminated Emergency Stop button. Cooperation of WinCC with Step 7 across different projects. Especially during the engineering phase of automation tasks, several people may have to work simultaneously on one project.

Using a PLC Proxy, the data to be visualized can be taken over from a STEP 7 or STEP 7 V5.4 update 3 project into the visualization project to configure the panel in parallel. This concept has been expanded with the TIA Portal V13 SP1. It is now possible to integrate redundant and routed controllers via a PLC Proxy.

Further, the PLC Proxy now also supports MPI communication. API Engineering of WinCC and Step. An interface for WinCC and STEP 7 in the TIA Portal enables the programming of applications that automate the engineering in the TIA Portal. It allows you to create your own applications for automatic engineering using external development environments (e.g., for the generation of HMI images and PLC software blocks). The objects of our panels and Runtime Advanced are supported for WinCC. Simple processing of projects with different engineering versions. WinCC V13 SP1 supports the processing of projects from WinCC V13 and V12 in the compatibility mode.

After processing in V13 SP1, such projects can be used again in a V12 or V13 engineering environment. So now it is not necessary to upgrade projects when changing the engineering version, which simplifies the handling of different projects. Investment protection due to migration. WinCC V13 SP1 offers a migration of WinCC flexible 2008 SP2 or SP3 projects and also of WinCC V7.2 projects, safeguarding the investments made over time. Panel feature advancements. WinCC V13 SP1 has added many new features to the Comfort Panel line of products. Popup screens have been added to allow user-configure screens that can be opened for more in-depth control or visualization information from an event.

These popup screens are ideal for a user to configure more control commands like buttons, IO fields, error information, etc., that call for operator control of an element on the existing screen. Popups can be configured to have locations set for display and ability for use of reusable faceplate configurations. The slide in screen functions allow a user to have additional commands available outside the constraints of the screen viewing area. This increases functionality without increasing screen size.

Ethernet-based camera live feeds can now be displayed directly onto the screen of the comfort panels. This allows a user to have the ability to view a camera image while still having the control commands present.